Vectra L2 Pump - EcoTech Marine
EcoTech Marine Vectra L2 DC Aquarium Water Pump - Mobius Ready
The World`s Smartest Centrifugal Return Pump - part deux (& now with Mobius control)!
From the beginning, the Ecotech Marine Vectra lineup has been steadily improving, evolving in design and material to ensure their reliability, thermal efficiency and their standard operation, bringing forth the Vectra 2s.
The Vectra 2s are second to none, with their improved couplings that are tailored for hard plumbing PVC and equipped with user friendly collars, making the Vectra even easier to use.
Same great performance - more robust and easier to work with.
So what`s new? The Vectra 2s have new:
Input and output couplers
Bases
Tougher motor sleeve
Improved thermal management
Ergonomic collars
The New Couplers
The Vectra 2s are still the same great modular pump that we have all come to love. Its new, robust, easy-to-turn grips make the couplers easier to remove, even under water. The standard PVC size also brings us one step closer to that clean PVC pipe, aesthetically pleasing install (instead of the basic vinyl hosing) we have all admired in other systems.
Vectra Modes
Mobius Compatible*: Mobius is EcoTech Marine’s new app-based aquarium command center. It allows you to control your Vectra pumps, Versa pumps, VorTech pumps and Radion LED lighting without the need for an external controller, bridge, or even internet connection! Mobius interfaces with your equipment via Bluetooth LE, which is inherent to most modern smart devices. The app is loaded with features to manage your lighting and dosing, including setup guides, specialty modes, and the ability to create custom modes with just the tap of a finger.
*The new Mobius-Ready Vectra pumps are also compatible with EcoSmart Live if you prefer to use the previous platform.
Battery Backup Compatible: In an aquarium with no flow, fish and corals begin to die in as little as 4 to 10 hours. The battery backup is reef tank insurance in an aluminum housing. By adding the Battery Backup, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. Please note that the VP013 acessory is also required when using the Battery Backup.
*Hours are estimated and will vary depending on battery life, pump mode and other factors.
Barb & Screen Kit: The Barb screen kit is an optional accessory designed to attach to your Vectra Return Pumps for use in submersed return applications. The Barb allows use of vinyl, silicone or braided tubing when hard plumbing is not an option, and it slips easily into the output of the pump. Please note it will still require PVC gluing.
The screen fitting increases the life expectancy of your pump by keeping livestock or large debris from entering your pump intake. Without a screen, you run the risk of harmful blockages that can cause damage to your impeller and more wear and tear to the pump. The screen fits into the inlet of the pump-- no gluing required.
The Vectra Advantage:
Cost Savings
Traditional AC pumps when used as a return pump for your sump are flow controlled through the use of a choke valve. This is method of control is inherently inefficient for two reasons.
1) The AC pump purchased must often be over-powered for your given setup to allow for flexibility.
2) By adding artificial impedance to your flow, electricity is wasted.
The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate.
Active Feedback
When used with the ReefLink, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
Quiet Operation
Controllability
Specifications:
Flow = 3100 gph (11,500 lph)
Max head pressure = 21.5` (6.5 m)
Footprint: 8.5"L x 5"W
Input dimension = 1.5" (38 mm)
Output dimension = 1.25" (31.75 mm)
Power = 150 watts
EcoTech Marine Vectra L2 DC Aquarium Water Pump - Mobius Ready
The World`s Smartest Centrifugal Return Pump - part deux (& now with Mobius control)!
From the beginning, the Ecotech Marine Vectra lineup has been steadily improving, evolving in design and material to ensure their reliability, thermal efficiency and their standard operation, bringing forth the Vectra 2s.
The Vectra 2s are second to none, with their improved couplings that are tailored for hard plumbing PVC and equipped with user friendly collars, making the Vectra even easier to use.
Same great performance - more robust and easier to work with.
So what`s new? The Vectra 2s have new:
Input and output couplers
Bases
Tougher motor sleeve
Improved thermal management
Ergonomic collars
The New Couplers
The Vectra 2s are still the same great modular pump that we have all come to love. Its new, robust, easy-to-turn grips make the couplers easier to remove, even under water. The standard PVC size also brings us one step closer to that clean PVC pipe, aesthetically pleasing install (instead of the basic vinyl hosing) we have all admired in other systems.
Vectra Modes
Mobius Compatible*: Mobius is EcoTech Marine’s new app-based aquarium command center. It allows you to control your Vectra pumps, Versa pumps, VorTech pumps and Radion LED lighting without the need for an external controller, bridge, or even internet connection! Mobius interfaces with your equipment via Bluetooth LE, which is inherent to most modern smart devices. The app is loaded with features to manage your lighting and dosing, including setup guides, specialty modes, and the ability to create custom modes with just the tap of a finger.
*The new Mobius-Ready Vectra pumps are also compatible with EcoSmart Live if you prefer to use the previous platform.
Battery Backup Compatible: In an aquarium with no flow, fish and corals begin to die in as little as 4 to 10 hours. The battery backup is reef tank insurance in an aluminum housing. By adding the Battery Backup, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. Please note that the VP013 acessory is also required when using the Battery Backup.
*Hours are estimated and will vary depending on battery life, pump mode and other factors.
Barb & Screen Kit: The Barb screen kit is an optional accessory designed to attach to your Vectra Return Pumps for use in submersed return applications. The Barb allows use of vinyl, silicone or braided tubing when hard plumbing is not an option, and it slips easily into the output of the pump. Please note it will still require PVC gluing.
The screen fitting increases the life expectancy of your pump by keeping livestock or large debris from entering your pump intake. Without a screen, you run the risk of harmful blockages that can cause damage to your impeller and more wear and tear to the pump. The screen fits into the inlet of the pump-- no gluing required.
The Vectra Advantage:
Cost Savings
Traditional AC pumps when used as a return pump for your sump are flow controlled through the use of a choke valve. This is method of control is inherently inefficient for two reasons.
1) The AC pump purchased must often be over-powered for your given setup to allow for flexibility.
2) By adding artificial impedance to your flow, electricity is wasted.
The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate.
Active Feedback
When used with the ReefLink, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
Quiet Operation
Controllability
Specifications:
Flow = 3100 gph (11,500 lph)
Max head pressure = 21.5` (6.5 m)
Footprint: 8.5"L x 5"W
Input dimension = 1.5" (38 mm)
Output dimension = 1.25" (31.75 mm)
Power = 150 watts
EcoTech Marine Vectra L2 DC Aquarium Water Pump - Mobius Ready
The World`s Smartest Centrifugal Return Pump - part deux (& now with Mobius control)!
From the beginning, the Ecotech Marine Vectra lineup has been steadily improving, evolving in design and material to ensure their reliability, thermal efficiency and their standard operation, bringing forth the Vectra 2s.
The Vectra 2s are second to none, with their improved couplings that are tailored for hard plumbing PVC and equipped with user friendly collars, making the Vectra even easier to use.
Same great performance - more robust and easier to work with.
So what`s new? The Vectra 2s have new:
Input and output couplers
Bases
Tougher motor sleeve
Improved thermal management
Ergonomic collars
The New Couplers
The Vectra 2s are still the same great modular pump that we have all come to love. Its new, robust, easy-to-turn grips make the couplers easier to remove, even under water. The standard PVC size also brings us one step closer to that clean PVC pipe, aesthetically pleasing install (instead of the basic vinyl hosing) we have all admired in other systems.
Vectra Modes
Mobius Compatible*: Mobius is EcoTech Marine’s new app-based aquarium command center. It allows you to control your Vectra pumps, Versa pumps, VorTech pumps and Radion LED lighting without the need for an external controller, bridge, or even internet connection! Mobius interfaces with your equipment via Bluetooth LE, which is inherent to most modern smart devices. The app is loaded with features to manage your lighting and dosing, including setup guides, specialty modes, and the ability to create custom modes with just the tap of a finger.
*The new Mobius-Ready Vectra pumps are also compatible with EcoSmart Live if you prefer to use the previous platform.
Battery Backup Compatible: In an aquarium with no flow, fish and corals begin to die in as little as 4 to 10 hours. The battery backup is reef tank insurance in an aluminum housing. By adding the Battery Backup, your tank is insulated from power interruptions, helping protect your valuable investment -and your tank inhabitants. Please note that the VP013 acessory is also required when using the Battery Backup.
*Hours are estimated and will vary depending on battery life, pump mode and other factors.
Barb & Screen Kit: The Barb screen kit is an optional accessory designed to attach to your Vectra Return Pumps for use in submersed return applications. The Barb allows use of vinyl, silicone or braided tubing when hard plumbing is not an option, and it slips easily into the output of the pump. Please note it will still require PVC gluing.
The screen fitting increases the life expectancy of your pump by keeping livestock or large debris from entering your pump intake. Without a screen, you run the risk of harmful blockages that can cause damage to your impeller and more wear and tear to the pump. The screen fits into the inlet of the pump-- no gluing required.
The Vectra Advantage:
Cost Savings
Traditional AC pumps when used as a return pump for your sump are flow controlled through the use of a choke valve. This is method of control is inherently inefficient for two reasons.
1) The AC pump purchased must often be over-powered for your given setup to allow for flexibility.
2) By adding artificial impedance to your flow, electricity is wasted.
The Vectra pump will always operate at the optimum efficiency because there is no need to use a flow restricting valve to achieve your desired flow rate.
Active Feedback
When used with the ReefLink, your Vectra pump can send you performance and status alerts right to your mobile device or computer. Your return pump is the heart of your aquarium; the faster you hear about an unexpected issue the more successful you will be as an aquarist.
Quiet Operation
Controllability
Specifications:
Flow = 3100 gph (11,500 lph)
Max head pressure = 21.5` (6.5 m)
Footprint: 8.5"L x 5"W
Input dimension = 1.5" (38 mm)
Output dimension = 1.25" (31.75 mm)
Power = 150 watts